Support de contacteur à clé, inox, montage discret sous le réservoir sans modification du faisceau d'origine, livré complet

The ignition lock bracket is the ideal solution for discreetly mounting your original ignition lock under the tank. The minimalist design of the bracket blends in perfectly with the overall look of your conversion.

• Unobtrusive installation of the ignition lock under the tank
• High-quality stainless steel for a long service life
• Integrated cable routing
• Mounting material included
• Developed for the original ignition lock, therefore no modification of the wiring harness necessary

Installation: Plug and play. Quick and easy. First mount your ignition lock to the Two Hands Motorcycles ignition lock bracket using the mounting material supplied. Then pull a loop through the slotted guide of the bracket using the cable ties supplied. Now feed the ignition lock cable through the loop and secure the cable tie. Now loosen the two screws of the upper engine mount. Finally, these are fitted together with the ignition lock bracket in reverse order.

Note: The ignition lock bracket is only suitable for XS400 ignition locks with lower mounting holes. The bracket is not compatible with ignition locks with centre holes. Please check which ignition lock is fitted to your conversion before purchasing.