'Motoscope' bracket for magnetic sensor, stainless steel, suitable for right brake caliper mounting, compatible with all Motogagdet magnetic sensors

With the magnet sensor bracket from Two Hands Motorcycles, you can integrate the magnetic sensors of the Motoscope speedometers optimally and inconspicuously into your front. Thanks to the well thought-out cable routing, you can route the sensor cable to your speedometer almost invisibly.

• Sophisticated mounting of your Motoscope magnetic sensors
• High-quality stainless steel for a long service life
• Compatible with all magnetic sensors from Motogagdet
• Mounted on the right-hand brake caliper mount

Installation: Plug and play - quick and easy. First, mount your Motoscope magnet sensor with the magnet sensor bracket from Two Hands Motorcycles. Now remove the lower screw of the brake caliper and tighten it again with the magnet sensor bracket.
Glue the Motogadget magnet to the centre of one of the brake disc bolts. We recommend using ‘Loctite 648’, for example.
Then carefully turn the front wheel until the magnet and the sensor are at the same height. Now adjust the position of the sensor using the two nuts so that the distance between the magnet and the sensor is approx. 2 mm. After checking the distance and that the wheel can move freely, the magnet sensor is firmly screwed to the bracket.